Arrma Talion 6s BLX & EXB Speed Truggy Ceramic Hybrid bearing kit.
24 bearings:
- 10- 8x16x5* Ceramic
- 4- 15x21x4 Ceramic
- 4- 6x10x3 Ceramic
- 4- 5x11x4 Ceramic
- 2- 8x19x6*Ceramic
* 2 extra 5x11's are for the 1/7 cars
- Abec 5
- Light oil
- Chrome steel races
- *Nylon & Steel Retainers
- Rubber seals
Fits:
- All years and versions of the Arrma Talion 6s BLX & EXB Speed Truggy
Please Note:
These bearings come with only a light layer of oil to protect against rust, Please add your choice of oil or grease
- Add a small amount of grease, or 3 drops of oil to each bearing,
- Use a small pick or exacto knife to carefully remove the seals,
After installing your new bearings, we suggest the following for break in
-remove the tires
-Suspend the vehicle or flip it upside down
-Turn power on and run the car at 25% throttle for 3 minutes (use trim setting if you want) while checking motor/ ESC temps
-After 3 minutes move to 50% throttle for 30 seconds while checking temps
- Pull full throttle for 10 seconds
- Go enjoy your Ceramics!
This process breaks the bearings in and helps them seat themselves, After this, theres no need to do it again to your bearings