Arrma 6s BLX Infraction Limitless Kraton, Mojave, Outcast, Senton, Talion, Typhon 6s blx


This variant is currently sold out

Please fill in the form below if you'd like to be notified when it becomes available.

Complete Arrma Kraton, Outcast, Senton, Talion, Typhon 6s BLX bearing kit. Includes bearings for the steering rack.

If you do Not have RPM hubs, please select stock. Stock size works in all other aftermarket hubs besides RPM

 This kit is compatible with all years and models of the following Arrma vehicles:

  • All Infraction 6s BLX models
  • All Limitless 6s BLX models
  • All Kraton 6s BLX models
  • All Mojave 6s BLX models
  • All Outcast 6s BLX models
  • All Senton 6s BLX models
  • All Talion 6s BLX models
  • All Typhon 6s BLX models

     22 bearings included:
    • 10- 8x16x5
    • 4- 15x21x4
    • 4- 6x10x3 (steering rack)
    • 2- 5x11x4
    • 2- 8x19x6



    Since Hot Racing hubs take a different size inner bearing, we will send the correct bearings you need if you have Hot Racing hubs.  All other aftermarket hubs take stock size bearings, unless otherwise noted   

    If you need motor bearings, please select Yes.

    Hot racing hubs include

    2 hubs

    • 2- 8x16x5
    • 2- 15x24x5

    4 hubs

    • 4- 8x16x5
    • 4- 15x24x5

    Motor bearings are for the stock 2050KV motor and include:

       We are out of Ceramic, If Ceramic chosen, you will receive Stainless Ceramics

    • 1- 5x13x4 metal shield abec 5 chrome steel
    • 1- 5x16x5 metal shield abec 5 chrome steel
    • Material will be the same as the kit chosen



    Chrome Steel

    This is our standard bearing that we have been stocking since the beginning. Chrome Steel is a great budget friendly bearing that will work in most any application.

    • Abec 3
    • Pre Greased
    • Chrome steel
    • Rubber sealed


    Metal Shield

    This is one of our standard bearings.  Metal shield bearings have less resistance than rubber seal, but don't seal as well.  These will be ideal in an application where you need less friction, but wont see much dirt. These are a great choice for clutch bearings, or in the transmission

    • Abec 3
    • Pre Greased
    • Chrome steel
    • Metal Shield


    Rubber seal abec 5

    This is the half way point bearing between our Standard and our Ceramic hybrid. These include reinforced Nylon retainers, which can handle up to 60% more speed than a chrome steel retainer. our test have shown that this bearing lasts longer than our standard rubber seal. Nylon retainers will become brittle in colder temperatures.

    • Abec 3
    • Pre Greased
    • Chrome steel with reinforced nylon retainer
    • Rubber Seal


    440 Stainless Steel

    Stainless Steel bearings offer 75-85% of the strength as the Chrome Steel bearing, but will not corrode when used in wet applications. Stainless Steel also will run safely at a higher temperature than a chrome steel

    • Abec 3
    • Pre Greased
    • 440 Stainless Steel balls retainers & races
    • Rubber sealed


    Ceramic Hybrid 

    Ceramic Hybrids last up to 10xs longer than Chrome Steel bearings.  These are used in applications where high speed, load and temperature are a factor. Ceramic balls are harder and rounder than stainless & chrome steel, so therefore they offer less rolling resistance. 

    • Abec 3
    • Light oil
    • Ceramic Silicon Nitride Si3N4 balls
    • Chrome steel races
    • Chrome steel & reinforced nylon retainers
    • Rubber sealed


    Reinforced nylon retainers

    Reinforced Nylon retainers can handle up to 60% more speed than a chrome steel retainer. Nylon retainers will lose their elasticity and become brittle in colder temperatures.

          Similar Products